Telenetics V.32M/14.4 Manuel d'utilisateur télécharger pdf

PENRIL MODEM FAMILY

V.34M/33.6, V.32M/19.2, V.32M/14.4

KEY FEATURES

• Universal, multimode, multispeed data and fax modems

• High performance Digital Signal Processing provides fast, flexible communications,

33.6Kbps to 300bps with DTE speeds to 230Kbps and support for 14.4Kbps fax traffic

•

Supports advanced features that maximize network uptime

• Multiple hardware versions to satisfy diverse installation requirements

• Rapid set-up for both local and remote devices

•

Continuous Data Terminal Equipment (DTE) and telephone line status reporting and

comprehensive diagnostics

• Compatible with Group 3, Class 1 and Class 2 fax and supports multiple modulation standards

and speeds for fax transmission

• Supports automatic dial backup for leased line and dial applications

• Multiple levels of network security

ADVANCED V.34 FEATURES

The Raymar-Telenetics Penril V.34 modem operates at speeds up to 33.6Kbps over the standard Public Switched

Telephone Network (PSTN) in accordance with ITU-R V.34 recommendation and over 2- or 4-wire unconditioned

leased lines. Call setup is accommodated by either ITU-R V.8 or V.25 procedures. Channel probing by the Penril V.34

automatically conditions the unit for maximum throughput and performance. Asymmetrical connection data rates allow

maximum throughput when channel directional characteristics differ. The Penril V.34 provides fallback rates in

accordance with the V.34 recommendation to accomodate channel limtis: 33.6K, 28.8K, 26.4K, 24.0K, 21.6K, 19.2K,

16.8K, 14.4K, 12.0K, 9600, 7200, 4800, 2400, 1200, 600, and 0-300 bits per second (bps).

INSTALLED BASE COMPATIBILITY

The Raymar-Telenetics Penril V.34 will fall back to non-V.34 modes to connect with installed base V.32terbo, V.32bis,

V.32, V.22bis, Bell 212A, V.22, V.21, and V.23 modems. Also, the Penril family of modems support ITU-T V.13 for

half-duplex simulation to work with those systems already configured for half-duplex modems. The V.29 Fast Train

(FT) mode is available for multidrop applications on all Penril modems.

FAX TRANSMISSIONS

The Raymar-Telenetics Penril modem family is compatible with Group 3, Class1, and Class 2 fax and supports

multiple modulation standards and speeds for fax transmission, including:

• ITU-T V.17 at 14.4K, 12.0K, 9600 & 7200bps

• ITU-T V.29 at 9600 & 7200 bps

• ITU-T V.27ter at 4800 & 2400bps

• ITU-T V.21 channel 2 at 300bps for T.30

Integrated support for fax traffic means that the Penril family works with standard communications software packages

to:

• Receive faxes on your computer and print faxes on a local plain paper printer

• Send faxes directly from your computer, and,

• Send data at rates up to 230.4Kbps

NETWORK MANAGEMENT

The management software built into the Raymar-Telenetics Penril modem family is compatible with Penril Communi-

cations Series 6000 Network Management System. The Series 6000 provides centralized configuration, status

monitoring and diagnostic control over a network of Penril modems in any operating mode: dial-up line, leased line, or

a combination of both. The Penril reports the condition of the attached DTE port and telephone line to the network

management console for easy detection and diagnosis of network faults.

RAYMAR INFORMATION

TECHNOLOGY, INC.

7325 Roseville Road

Sacramento, CA 95842

916-783-1951

FAX 916-783-1952

[email protected]

1-800-695-1951

Tech Support Hotline

1-800-747-1522

www.raymarinc.com

PENRIL MODEM FAMILY: Alliance/Datalink Series

V.34M/33.6, V.32M/19.2, V.32M/14.4

Alliance / Datalink Series

1 2

Résumé du contenu

Page 1 - PENRIL MODEM FAMILY

PENRIL MODEM FAMILY V.34M/33.6, V.32M/19.2, V.32M/14.4KEY FEATURES• Universal, multimode, multispeed data and fax modems• High performance Dig

Page 2 - PRODUCT SPECIFICATIONS

PENRIL MODEM FAMILY: V.34M/33.6, V.32M/19.2, V.32M/14.4PENRIL MODEM FAMILY: Alliance / Datalink SeriesV.34M/33.6, V.32M/19.2, V.32M/14.4PRODUCT SPECI

Modèles reliés V.32M/19.2 | V.34M/33.6 |

Commentaires sur ces manuels

Pas de commentaire

Telenetics V.32M/14.4 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Telenetics V.32M/14.4. Telenetics V.32M/14.4 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés V.32M/19.2 | V.34M/33.6 |

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Telenetics V.32M/14.4